AISC Design Guide 15 – Rehabilitation And Retrofit Guide (KET0035)

AISC Design Guide 15 – Rehabilitation And Retrofit Guide, Contents:

Chapter 1 Historical Review of Specifications

1.1 Structural Shapes and Plates

1.2 Steel Pipe and Hollow Structural Sections

1.3 Hot-Driven Rivets

1.4 Structural Bolts

1.4.1Carbon Steel Bolts

1.4.2 High Strength Steel Bolts

1.5 Structural Welding

Chapter 2 Properties of Beam and Column Sections 1873-2000

2.1 Steel Sections 1971-2000

2.2 Steel Sections 1953 -1970

2.3 Steel Sections 1887-1952

2.4 Wrought Iron Sections 1873 – 1900

Chapter 3 Evaluation of Existing Structures

3.1 Introduction

3.2 Evaluation Methods

3.2.1 Gravity Loads

3.2.2 Seismic Loads

3.3 Chapter N, AISC LRFD Specification

3.3.1 Specification Provisions

3.3.2 Commentary

Chapter 4 Enhancement of Existing Structural Systems

4.1 Gravity Systems

4.1.1 Floors

4.1.2.Columns

4.2 Lateral Systems

4.2.1 Fully Restrained Moment Frames

4.2.2 Partially Restrained Moment Frames

4.2.3 Concentrically Braced Frames

4.2.4 Eccentric Braced Frames

4.3 Connections

4.3.1 Connection Types

4.3.2 Typical Methods of Reinforcement

4.3.3 Rehab of Seismic Moment Connections

4.4 Welding to Existing Members

4.5 Thermal Cutting of Existing Members

4.6 Drilling Holes in Existing Members

Chapter 5 References on Rehabilitation and Retrofit

5.1 Reference List

5.2 Summaries of References

5.2.1 General Retrofit

5.2.2 Retrofit Case Studies

5.2.3 Seismic Retrofit

Appendix Historical Review of Specifications and Manual

A1. AISC Specifications – 1923 to 1999

A2. AISC Manual – 1927 to 1995

A3. Specifications for High-Strength Bolted Joints – 1951 to 2000

A4. Design Specifications for Structural Welding – 1934 to 1999

A5. AISC Code of Standard Practice – 1924 to 2000

AISC Design Guide 15 – Rehabilitation And Retrofit Guide

Password: P3y1n6#99