Steel Building Design Design Data (KET0015)

Steel Building Design Design Data, Contents:

1        GENERAL

1.1     Material, section dimensions and tolerances

1.2     Dimensional units

1.3     Property units

1.4     Mass and force units

1.5     Axis convention

2        DIMENSIONS OF SECTIONS

2.1     Masses

2.2     Ratios for local buckling

2.3     Dimensions for detailing

2.3.1   UB sections, uc sections and bearing piles

2.3.2   Joists

2.3.3   Parallel flange channels

3        SECTION PROPERTIES

3.1     General

3.2     Sections other than hollow sections

3.2.1   Second moment of area (I)

3.2.2   Radius of gyration (i)

3.2.3   Elastic section modulus ( W_el)

3.2.4   Plastic section modulus (W_pl)

3.2.5   Buckling parameter (U) and torsional index (X)

3.2.6   Warping constant (Iw) and torsional constant (It)

3.2.7   Equivalent slenderness coefficient (ϕ) and monosymmetry index (ψ)

3.3     Hollow sections

3.3.1   Common properties

3.3.2   Plastic section modulus of hollow sections (W_pl)

3.3.3   Torsional constant (I_r)

3.3.4   Torsional section modulus ( W_t)

4        EFFECTIVE SECTION PROPERTIES

4.1     General

4.2     Effective section properties of members subject to compression

4.3     Effective section properties of members subject to pure bending

5        INTRODUCTION TO RESISTANCE TABLES

5.1     General

5.2     Yield strength

6        COMPRESSION TABLES

6.1     Compression members: UB and uc sections

6.2     Compression members: hollow sections

6.3     Compression members: parallel flange channels

6.4     Compression members: single angles

7        TENSION TABLES

7.1     Tension members: Single angles

8        BENDING TABLES

8.1     Bending: UB sections, uc sections, joists and parallel flange channels

8.2     Bending: Hollow sections

8.2.1   Circular and square hollow sections

8.2.2   Rectangular hollow sections

8.2.3   Elliptical hollow sections

9        RESISTANCE TO TRANSVERSE FORCES TABLES (WEB BEARING AND BUCKLING)

9.1     UB sections, uc sections, joists and parallel flange channels

9.2     Square and rectangular hollow sections

10      AXIAL FORCE & BENDING TABLES

10.1    Axial force and bending: UB sections, uc sections, joists and parallel flange channels

10.1.1 Cross section resistance check

10.1.2 Member buckling check

10.2    Axial force and bending: hollow sections

10.2.1 Cross section resistance check

10.2.2 Member buckling check

11      BOLTS AND WELDS

11.1    Bolt resistances

11.2    Welds

12      SECTION DESIGNATIONS AND STEEL GRADES

12.1    Open Sections

1 2.2  Hollow Sections

13      REFERENCES

Steel Building Design Design Data

Password: Q8s6q5#72